FujiFilm FinePix S20 Pro Owner'S Manual Download

Page: 31 / 120

ＥＲＡＳＥＯＫ？

ＹＥＳ

ＣＡＮＣＥＬ

ＯＫ

BACK

ＦＲ

ＦＲＡＭ

ＡＭＥ

１００−０００９

ＢＡＣＫ

ＥＲＡＳＥ

ＦＲ

ＦＲＡＭＥ

ＡＬＬＦＲ

ＡＬＬＦＲＡＭ

ＡＭＥＳ

ＥＳ

ＢＡＣＫ

ＥＲＡＳＥ

ＦＲ

ＦＲＡＭ

ＡＭＥ

ＡＬＬＦＲ

ＡＬＬＦＲＡＭ

ＡＭＥＳ

ＥＳ

Using

the Camera

ERASING IMAGES (ERASE FRAME)

PLAYBACK MODE

Set the Power switch to “

”.

Press the “MENU/OK” button during playback to
display the menu.

Press “

” or “

” to select “

” ERASE.

Press “

” or “

” to select “FRAME”.

Press the “MENU/OK” button to confirm the
selection.

See P.71 for information on “ALL FRAMES”.

Press “

” or “

” to select a frame (file) to be

erased.

Press the “MENU/OK” button to erase a displayed
frame (file).

To erase another frame (file), repeat steps

and

●

Pressing the “MENU/OK” button repeatedly erases
consecutive frame (files). Take care not to erase a frame
(files) by mistake.

●

Press “

” or “

” to select “

BACK” and press “MENU/OK”

button to return to single-frame playback.

●

Press the “BACK” button to cancel erasing single frame.

Note that erased images cannot be recovered.
Please copy important frames (files) to avoid
loosing them to your computer or another media.

Summary of Contents for FinePix S20 Pro

























































































































Search results

Summary of Contents for FinePix S20 Pro

Reviews:

Related manuals for FinePix S20 Pro

Brands by name

Popular brands

FujiFilm FinePix S20 Pro, Owner'S Manual

Search results

Summary of Contents for FinePix S20 Pro

Reviews:

Related manuals for FinePix S20 Pro

Brands by name

Popular brands