7
Be
fore
Y
o
u
Begi
n
Introduction
The Electronic Viewfinder (EVF)
The electronic viewfinder provides the same information as the monitor, and can be
used when bright lighting conditions make the display in the monitor difficult to see.
Press
EVF/LCD
button to select from the monitor or electric view finder mode.
LCD
EVF
Bright Ambient Lighting
Reflections and glare caused by bright ambient lighting may make it hard to see the display in the monitor,
particularly when the camera is used outdoors. This can be addressed by holding the
EVF/LCD
button to trigger
outdoor mode. Outdoor mode can also be enabled using the
MONITOR SUNLIGHT MODE
option in the
setup menu (
101).
Diopter adjustment control
The camera is equipped with diopter adjustment to accommodate individ-
ual differences in vision. Slide the diopter adjustment control up and down
until the viewfinder display is in sharp focus.
*
Strong sunlight focused through the viewfinder may damage the panel of electronic viewfinder (EVF). Do not
aim the electronic viewfinder at the sun.
Summary of Contents for FINEPIX S1 Series
Page 184: ...132 Memo ...
Page 185: ...133 Memo ...