x
For Your Safety
This product, which contains encryption function de-
veloped in the United States, is controlled by the United
States Export Administration Regulations and may not
be exported or re-exported to any country to which the
United States embargoes goods.
•
Use only as part of a wireless network.
FUJIFILM does not
accept liability for damages resulting from unauthorized
use. Do not use in applications requiring a high degree of
reliability, for example in medical devices or other systems
that may directly or indirectly impact human life. When
using the device in computer and other systems that de-
mand a greater degree of reliability than wireless networks,
be sure to take all necessary precautions to ensure safety
and prevent malfunction.
•
Use only in the country in which the device was purchased.
This device conforms to regulations governing wireless
network devices in the country in which it was purchased.
Observe all location regulations when using the device.
FUJIFILM does not accept liability for problems arising from
use in other jurisdictions.
•
Wireless data (images) may be intercepted by third parties.
The
security of data transmitted over wireless networks is not
guaranteed.
•
Do not use the device in locations subject to magnetic fields,
static electricity, or radio interference.
Do not use the trans-
mitter in the vicinity of microwave ovens or in other loca-
tions subject to magnetic fields, static electricity, or radio
interference that may prevent reception of wireless signals.
Mutual interference may occur when the transmitter is
used in the vicinity of other wireless devices operating in
the 2.4 GHz band.
•
The wireless transmitter operates in the 2.4 GHz band using
DSSS and OFDM modulation.
Wireless Network Devices: Cautions
•
This device operates on the same frequency as commercial,
educational, and medical devices and wireless transmitters.
It
also operates on the same frequency as licensed transmit-
ters and special unlicensed low-voltage transmitters used
in RFID tracking systems for assembly lines and in other
similar applications.
•
To prevent interference with the above devices, observe the
following precautions.
Confirm that the RFID transmitter
is not in operation before using this device. Should you
observe that the device causes interference in licensed
transmitters used for RFID tracking, immediately choose
a new operating frequency for this device to prevent ad-
ditional interference. If you notice that this device causes
interference in low-voltage RFID tracing systems, contact a
FUJIFILM representative.
2.4DS/OF4
This sticker indicates that
this device operates in
the 2.4 GHz band using
DSSS and OFDM modula-
tion and may cause inter-
ference at distances of up
to 40 m.
Summary of Contents for FINEPIX S1 Series
Page 184: ...132 Memo ...
Page 185: ...133 Memo ...
