112
Caring for the Camera
To ensure continued enjoyment of the product, observe the following precautions.
Storage and Use
If the camera will not be used for an extended pe-
riod, remove the battery and memory card. Avoid
using the camera for extended periods or storing
it in locations that are:
• exposed to steam or smoke
• very humid or extremely dusty
• exposed to direct sunlight or very high tempera-
tures, such as in a closed vehicle on a sunny day
• extremely cold
• subject to strong vibration
• exposed to strong magnetic fields, such as near
a broadcasting antenna, power line, radar emit-
ter, motor, transformer, or magnet
• in contact with volatile chemicals such as pesti-
cides
• next to rubber or vinyl products
■
Water and Sand
This camera cannot be used under water. Keep
the camera against penetration of garbage, mud,
sand, dust, water, harmful gas, salt, and so on. Do
not place the camera on a wet surface. Make sure
the covers (caps) for the battery, card slot and
ports are securely closed before use. If the cam-
era is exposed to rain, droplets of water, and so
on, dry it thoroughly.
■
Condensation
Sudden increases in temperature, such as occur
when entering a heated building on a cold day,
can cause condensation inside the camera. If this
occurs, turn the camera off and wait an hour be-
fore turning it on again. If condensation forms on
the memory card, remove the card and wait for
the condensation to dissipate.
Summary of Contents for FINEPIX S1 Series
Page 184: ...132 Memo ...
Page 185: ...133 Memo ...