FujiFilm FINEPIX 4700 ZOOM, Owner'S Manual

Page: 41 / 63

4
81
[
DPOF DATE SETTING
PLAYBACK MENU
This function allows you to select whether or not
the date of shooting is included on the print.
➀
Set the Mode switch to “ 1 ”.
➁
Press the “MENU/EXE” button to display the
menu on the LCD monitor.
➂
Press “ c ” to select “
K
DPOF”.
➀
Use “ b ” to select “ H ”.
➁
Press “ d c ” to specify “DATE ON” or “DATE
OFF”. This setting is then valid for all the
prints until the setting is changed.
●
!
Before specifying any other settings, first specify
whether date is to be shown or not.
●
!
DPOF settings cannot be specified for movie.
1 2
●
➀
●
➁
●
➀
●
➁
●
➂
80
HOW TO SPECIFY PRINT OPTIONS
With the FinePix4700 ZOOM, you can order prints using the Digital Print Order Format
(DPOF).
You can use the DPOF to specify the following:
● The frames to be printed and the number of prints for each frame
●
Imprinting of the date and time
This section gives a detailed description of how to order your prints with the FinePix4700 ZOOM.
✽
Note that some printers do not support date and time imprinting or specification of the
number of prints.
✽
Note that the warnings shown below may be displayed while you are specifying the
prints.
( ➡
P.114)
When you erase the image, the DPOF setting for that image are deleted at the same
time
( ➡
P.114)
If you load a SmartMedia that contains frames specified for printing on another
camera, those print specifications are all reset and replaced by the new print
specifications.
( ➡
P.114)
No more than 999 frames can be specified on the same SmartMedia.
D P O F S P E C I F I E D .
E R A S E O K ?