FujiFilm ClearView CS, Service Manual

Page: 964 / 1404

CR-IR 363
Service Manual
MU-31
MU-31
011-202-08E
09.30.2009 FM5540
4.3.11 EDIT HISTORY
Used to view the HISTORY information of the RU and clear its value.
Information, such as the number of IPs processed by the RU and lighting time of the
erasure lamp, is displayed.
When units are replaced, their information may be reset.
n
Function
The following three types of information are displayed, and they may be edited.
l
“All Profect History” tab screen
Ÿ
PROCESSING COUNTER
The number of IPs processed by the RU, according to the IP size.
Image reading, secondary erasure, and primary erasure are all subject to
counting.
Ÿ
LASER
Lighting time and lighting count for the laser of the scanner unit.
Image reading, secondary erasure, and primary erasure, as well as lighting
activated in MUTL, are subject to counting.
Ÿ
ERASURE LAMP
Lighting time and lighting count for the erasure lamp.
Image reading, secondary erasure, and primary erasure, as well as lighting
activated in MUTL, are subject to counting.
Lighting time and lighting count for preheating are also subject to counting.
l
“Minor Change History” tab screen
Ÿ
PUMP
Number of times pump on each shelf has been used.
Image reading, secondary erasure, and primary erasure, as well as lighting
activated in MUTL, are subject to counting.
Ÿ
THE ERASUER LAMP CLEANING
Number of times erase lamp was lit for IP erasing after cleaning was performed
for erase lamp.
u
NOTES
u
- Information marked by * in the illustration is reflected in the Equipment
Information that can be checked via the User Utility of the RU.
- When the data is updated by EDIT HISTORY and then the "SET" or "RESET"
button is clicked, it is reflected in the Equipment Information of the RU.
The LCD panel display is updated at the time when the User Utility screen is
switched to another or when the RU power is turned OFF and back ON.
n
Detail on TOTAL PROCESSING COUNTER
l
“RESET”
Each item in "PROCESSING COUNTER" is cleared.
l
“SINCE”
When the "RESET" button is clicked, the system date is entered.
A specific date may be entered manually.
l
“TOTAL PROCESSING COUNTER”
The number of image reading, secondary erasure, and primary erasure executed
is counted according to the IP size, and the resulting total is displayed in "ALL IP
SIZES".