FujiFilm ClearView CS, Service Manual

Page: 271 / 1404

CR-IR 363
Service Manual
MT-114
MT-114
011-202-04
11.15.2004 FM4425
5.9 Error Code Analysis Flow: Scanner 9
10271, 12271
n
Analysis Flow
Check the error log in the ERROR DB.
m
Errors 10230-10236 logged?
Q1
Check the error code table again and troubleshoot.
{MT:2. _Error Code Table}
Y
N
A
Check the fuses G011 and H011 on the SCN17A/SCT17B Board.
{MT:9. _Procedures for Checking the Fuses}
Q2
Error recurs?
Q3
N
Y
A
CPU91A and SCN17A/SCT17B boards tested in MUTL normal?
{MT:18. _Board Test in MUTL}
Q4
N
Y
Q7
Check the laser (LDD).
{MT:13. _Procedures for Checking the Scanner I/O}
Q5
Error recurs?
Q6
N
Y
A
m Disconnect and reconnect the connectors in the following sequence. If the error is
detected, replace the affected part.
1. SCN17A/SCT17B board
{MC:13.4 _Scanner Board}
2. Scanning optics unit
{MC:10. _Scanning Optics Unit}
3. CPU91A board
{MC:13.2 _CPU91A Board}
Reseat the error-causing board and check if the error occurs again.
Q7
N
Y
A
m
Replace the error-causing board.
{MC:13.2 _CPU91A Board}
{MC:13.4 _Scanner Board}