FujiFilm ASK-500, Operation Manual

Page: 18 / 25

15
PREP
ARA
TION
TROUBLE-
SHOOTING
FEA
TURES
PRECAUTIONS
OTHERS
CONTENTS
ERROR MESSAGES AND COUNTERMEASURES
INDICATIONS ON THE FRONT PANEL AND COUNTERMEASURES
If, for some reason, printing is not possible or an error occurs during printing, the indicators on the front panel will illuminate
or blink. In this case, follow the procedure described below.
: Steady on : Off : Blinking
ALARM PAPER/
RIBBON
DOOR POWER Causes and Countermeasures Page
The printer is in the standby mode.
7
( Blinks
slowly )
The printer is in the power save mode.
When the printer is idle for an extended period, it
automatically enters the power save mode from
the standby mode, reducing power consumption.
It may take time that the printer is ready to print
images after the image data is sent.
7
The printing unit is open.
• Close the printing unit.
The paper strip bin is removed.
• Attach the paper strip bin properly.
7
7
A paper jam or a problem concerning the ink
ribbon occurs.
• Refer to “Overcoming paper jams.”
16
The ink ribbon which is not available to this
printer is installed.
• Replace the ink ribbon with a new one.
10
The print paper or ink ribbon is not installed.
The print paper or ink ribbon is used up.
• Install new print paper or ink ribbon.
10-12
Other errors
18
If any of the indicator lights (ALARM, PAPER/RIBBON or DOOR) flashes or stay lit, open the printing unit and perform
above countermeasures.