background image

OTHERS

PRECAUTIONS

FEA
TURES

PREP

ARA

TION

TROUBLE-

SHOOTING

CONTENTS

WARNING :

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN 

OR MOISTURE.

CAUTION : 

TO REDUCE THE RISK OF ELECTRIC 

SHOCK, DO NOT REMOVE COVER (OR BACK) 

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE 

PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended 

to alert the user to the presence of uninsulated “dangerous voltage” within the 

product’s enclosure that may be of sufficient magnitude to constitute the risk of 

electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to 

the presence of important operating and maintenance (servicing) instructions in the 

literature accompanying the appliance.

The “Caution, hot surface” symbol indicates that the marked item may be hot and 

should not be touched.

The “Electro Static Discharge (ESD) warning” symbol indicates that trouble (including 

equipment malfunction) due to static electricity may occur in certain conditions.

The “STANDBY” symbol

The “Alternating current” symbol indicates that the equipment is suitable for 

alternating current only.

WARNING:

Use the included AC power cord so as not to interfere with radio and television reception.  

If you use other cables, it may cause interference with radio and television reception.

Summary of Contents for ASK-500


























Reviews: