FujiFilm ApeosPro C650 Reference Manual Download Page 77

Page: 77 / 88

Finisher D

Insert the Staple Cartridge into the original position.

Hold the handle and lightly press it up until you hear a click.

Note

Align the “



” marks.

Push in the Booklet Maker [3].

Close the cover.

When Staple Cartridge for Side Stitch Comes off

If the Staple Cartridge comes off from the unit due to fall during operation, etc., perform the fol-

lowing steps.

Caution

Please be very careful not to hurt your fingers, etc. when removing the deformed staples.

Note

Perform the same steps as well when the Staple Cartridge is separated from the unit.

Open the cover of the unit and remove all the de-

formed staples.

Move the handle on the rear side of the unit in the

arrow direction.

Summary of Contents for ApeosPro C650

























































































Search results

Summary of Contents for ApeosPro C650

Reviews:

Related manuals for ApeosPro C650

Brands by name

Popular brands

FujiFilm ApeosPro C650, Reference Manual

Search results

Summary of Contents for ApeosPro C650

Reviews:

Related manuals for ApeosPro C650

Brands by name

Popular brands