Fuji Xerox DocuPrint P205 b Page 10 User Manual Download

Page: 10 / 159

Using This Guide

Organization

This guide is organized into the following chapters. The summary of each chapter is as follows:

Specifications

Describes the printer specifications.

Basic Operation

Describes the main components of the printer, the power saver mode,
and how to turn on the printer.

Printer Management Software

Describes the software available for the printer.

Installing the Prin t Driver

Describes the basic information about how to connect the printer to
your computer and how to install the print driver.

Printing Basics

Describes the supported paper, how to load paper, and how to print
data using various print features.

Using the Operator Panel

Describes the indicators on the operator panel.

Troubleshooting

Describes the troubleshooting tips for printer problems such as paper
jams.

Maintenance

Describes how to clean the printer, how to replace toner cartridges,
and how to see the printer status.

Contacting Fuji Xerox

Describes support information.

Summary of Contents for DocuPrint P205 b
































































































































































Search results

Summary of Contents for DocuPrint P205 b

Reviews:

Related manuals for DocuPrint P205 b

Brands by name

Popular brands

Fuji Xerox DocuPrint P205 b, User Manual

Search results

Summary of Contents for DocuPrint P205 b

Reviews:

Related manuals for DocuPrint P205 b

Brands by name

Popular brands