Fuji Xerox Document Centre C250, User Manual

Page: 325 / 556

Setup Menu
323
Setups
11
Setup Menu
In [Setup Menu], you can create mailboxes and job flow, and create and update
address book entries (fax/iFax/mail scan).
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
The following are the places to reference for information about each setting.
Mailbox .................................................................................................................................... 323
Job Flow Sheets........................................................................................................................ 326
Content Check .......................................................................................................................... 333
Address Book ........................................................................................................................... 334
Group Send............................................................................................................................... 340
Comments................................................................................................................................. 341
Paper Type................................................................................................................................ 341
1
In the [System Settings] screen,
select [Setup Menu].
For the method of displaying the [System
Settings] screen, refer to "System Settings
Procedure" (P.240).
2
Select the item to be created (or
changed).
Mailbox
You register mailboxes in order to stored scanned documents, or carry out mailbox
communications, and when assigning received documents to mailboxes. You can
register up to 200 mailboxes.
Scanned documents, and documents received for a mailbox or stored for polling are
stored in the specified mailbox. It is convenient to make separate mailboxes, for
example for received documents, and documents to be transmitted (store for polling),
according to purpose.
You can check the current mailboxes in the "Mailbox registration list." For more information, refer to
"Mailbox List" (P.380).
1
Select [Mailbox].
2
Select the mailbox to be registered,
and select [Create/Delete].
Note • Select [ ] to display the
previous screen and select
[
] to display the next screen.
• By entering a three-digit number with the numeric keypad, you can specify the mailbox
directly.