manualshive.com logo in svg

Fuji Xerox Document Centre C250, User Manual

Share
Download
Fuji Xerox Document Centre C250 User Manual Download Page 382

13 Machine Status

380

Mac

h

ine Stat

us

13

„

Comments List

You can check the comments saved for use on cover notes.

„

Billing Data List

You can check the status of the billing data.

Note

•

[Billing Data List] appears when [Fax] in the auditron feature is set to [On].

If you select [Address Book], the following screen for setting the range of address 
numbers is displayed. Select the number to be stored, and press the <Start> button.

z

Select All

You can print a list of all billing data.

Mailbox List

This prints the mailbox settings and the procedure for saving to the mailbox, in a table.

Note

•

[Mailbox List] appears when entered from the [User Mode] of System Administration mode.

1

Select [Mailbox List].

2

Select the range of mailbox 
numbers to be printed.

3

Press the <Start> button.

Job Counter Report

This prints the counter report for each feature.

1

Select [Job Counter Report].

2

Select [Job Counter Report].

3

Press the <Start> button.

Auditron Administration

You can print a Auditron Report by user. Note that the Auditron Report by user that 
appears on the screen depends on whether the auditron administration feature is 
enabled or not.

Note

•

[Auditron Administration] appears when entered from the [User Mode] of System 
Administration mode.

When all auditron features are set to [Off]

When the auditron features are set to [Off], the following screen appears, and you can 
print a printer meter report.

For information about the auditron administration feature settings, refer to "Auditron Mode" (P.352).

Summary of Contents for Document Centre C250













































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands