Fuji Xerox DOCUCENTRE-II C3000, User Manual

Page: 354 / 603

11 System Settings
352
Sy
st
em Set
tin
gs
11
„ Save in Charge Print
Regardless of whether the authentication feature is being used or not, all received jobs are
saved using the Charge Print feature.
Note • When [Save in Charge Print] is selected, the Security Print, Sample Print, and Delayed Print
settings specified on the print driver will be ignored.
Fax Billing Data
You can make settings for the fax billing.
Important • In order to register the billing data, enable the fax feature for the Login Setup/Auditron
Administration prior to the operations. For details on how to enable the fax feature, refer to
"Auditron Mode" (P.354).
Note • Set the communications time per unit charge in each time band (daytime/night/midnight) in
[Billing]. For information on how to set [Billing], refer to "Billing - Day Time, Billing - Night
Time, Billing - Midnight" (P.340).
• The registered details can be confirmed by printing the [Billing Data List]. For information
about how to print, refer to "Billing Data List" (P.385).
1
Enter the System Administration
mode.
For details on how to enter the System
Administration mode, refer to "System
Settings Procedure" (P.250).
2
Select [Fax Billing Data] and select
[Charge Rate per Unit].
„
Charge Rate per Unit
This is a communication charge per unit.
3
Select [Change Settings].
4
Enter an amount using the
keyboard displayed on the screen
or the numeric keypad.
5
Select [Save].
Password Entry from Control Panel
You can set whether a password is required when the system administrator or a user
uses the machine. Select [On] to enable "System Administrator Password" (P.344),
and "Password" (P.347) for [Create/Check User Accounts].
Select [Off] to not require the password, even if a password is set in the above
procedures.
Important • The setting of [Password Entry from Control Panel] is used for authentication on the
machine. A password must always be entered when accessing from remote devices using
CentreWare Internet Services or the like, regardless of the use of password setting.
Depending on authentication procedures, a password may be required for other processes
as well.
Note • The system administrator’s password is also required when you change settings from
CentreWare Internet Services.
Login Setup/Auditron Mode
Set whether the Auditron administration feature is enabled or not, and whether to
request an authentication operation.