Fuji Xerox DOCUCENTRE-II C3000, User Manual

Page: 387 / 603

Billing Meter/Print Report
385
M
ach
in
e St
atu
s
13
„ Comment List
You can check the registered comments to be used on cover notes.
„ Billing Data List
You can check the status of the billing data.
Note • [Billing Data List] appears when [Fax] for the Auditron Administration feature is set to [On].
If you select [Billing Data List], the following screen for specifying a range of address
numbers is displayed. Select a range of numbers, and press the <Start> button.
z
Select All
You can print the list of all billing data.
Mailbox List
Prints the list of mailbox settings and the procedure for saving documents to mailboxes.
Note • [Mailbox List] appears when [User Mode] is selected in the System Administration mode.
1
Select [Mailbox List].
Note • To display the [Mailbox List]
screen, select the <Machine
Status> button, and then
select [Billing Meter/Print
Report] > [Print Report/List] >
[Mailbox List].
2
Select a range of mailbox numbers to be printed.
3
Press the <Start> button.
Job Counter Report
Prints the counter report for each feature.
Note • [Job Counter Report] appears when [User Mode] is selected in the System Administration
mode.
1
Select [Job Counter Report].
Note • To display the [Job Counter
Report] screen, select the
<Machine Status> button, and
then select [Billing Meter/Print
Report] > [Print Report/List] >
[Job Counter Report].
2
Select [Job Counter Report].
3
Press the <Start> button.
Auditron Administration
You can print an auditron report by user. Note that the content on the screen differs
depending on whether the Auditron Administration feature is enabled.
Note • [Auditron Administration] appears when [User Mode] is selected in the System
Administration mode.