Fuji Xerox DOCUCENTRE-II C3000, User Manual

Page: 252 / 603

11 System Settings
250
Sy
st
em Set
tin
gs
11
System Settings Procedure
To make or change the system settings, it is necessary to enter the System
Administration mode.
This section describes the basic procedures for system settings. The following shows
the reference section for each procedure.
Step 1 Entering System Administration Mode .........................................................................250
Step 2 Entering the System Administrator User ID and Password...........................................250
Step 3 Selecting the Operation Mode from the System Administrator Menu ..........................251
Step 4 Selecting an Item on the [System Settings] Screen .......................................................251
Step 5 Setting a Feature ............................................................................................................252
Step 6 Exiting the System Administration Mode......................................................................252
Step 1 Entering System Administration Mode
1
Press the <Log In/Out> button.
Step 2 Entering the System Administrator User ID and Password
To enter System Administration mode, enter the system administrator user ID. If you
are using the authentication feature, a password may be required.
It is recommended to change the system administrator user ID and password immediately after installing
the machine. For more information, refer to "System Administrator Settings" (P.344).
1
Enter the user ID with the numeric
keypad or a keyboard displayed by
pressing [Keyboard], and select
[Confirm].
Note • The default user ID is "11111".
When using the
Authentication feature, a
password is required. The
default password is "x-admin".
• The machine displays the following message if the system administration login failed:
"Login failed. Re-enter User Details and select Confirm."
• The machine displays the following message if the login failed more than the specified
number of times:
"You have made the maximum number of attempts to access the system. Access denied."
<Log In/Out>
button