Fuji Xerox DOCUCENTRE-II C3000, User Manual

Page: 346 / 603

11 System Settings
344
Sy
st
em Set
tin
gs
11
System Administrator Settings
In [System Administrator Settings], you can set the system administrator ID and
password.
You are recommended to set the system administrator ID and password to prevent
setting changes and ensure security.
The following shows the reference section for each item.
System Administrator Login ID................................................................................................344
System Administrator Password ...............................................................................................344
Maximum Login Attempts........................................................................................................345
1
In the [System Settings] screen, select [System Administrator Settings].
For the method of displaying the [System Settings] screen, refer to "System Settings Procedure" (P.250).
2
Select any item.
System Administrator Login ID
Set the system administrator user ID. Enter the ID from 1 to 32 characters.
Note • The default of the system administrator user ID is “11111”.
1
Select [System Administrator Login
ID].
2
Select [On].
3
Select [Keyboard], then in [New
System Administrator Login ID],
enter the system administrator ID, and select [Save].
4
Select [Keyboard] once more, and in [Re-enter System Administrator Login ID], enter
the same system administrator ID, and select [Save].
5
Select [Save].
System Administrator Password
Set the password for System Administration mode.
Setting a password is strongly recommended for security.
Note • The default of the system administrator password is “x-admin”.
The system administrator password becomes valid when the password feature is activated in
the Login Setup/Auditron Administration operation. Set the password after setting the system
administrator user ID.
You can set the password from 4 to 12 numeric digits.
For information about enabling and disabling passwords, refer to "Login Setup/Auditron Mode" (P.352).
1
Select [System Administrator
Password].
2
Select [Keyboard].
3
Enter a new password (4 to 12
digits) in [New Password], and
select [Next].