Fuji Xerox apeosport-IV 6080, Administrator'S Manual

Page: 255 / 705

Authentication/Security Settings
255
T
ools
5
Authentication/Security Settings
In [Authentication/Security Settings], you can configure the registration and
authentication of a user and security settings.
For more information about the feature, refer to "Authentication and Accounting Features" (P.365).
The following shows the reference section for each setting.
System Administrator Settings................................................................................................. 255
Authentication .......................................................................................................................... 256
Allow User to Disable Active Settings .................................................................................... 263
Job Status Default..................................................................................................................... 264
Overwrite Hard Disk ................................................................................................................ 264
1
On the [Tools] screen, select [Authentication/Security Settings].
For the method of displaying the [Tools] screen, refer to "System Settings Procedure" (P.104).
2
Select an item to set or change.
System Administrator Settings
In [System Administrator Settings], you can set the system administrator ID and
passcode.
We recommend setting the system administrator ID and passcode to prevent
unauthorized setting changes and ensure security.
System Administrator's Login ID
Set the system administrator's user ID. Enter the ID from 1 to 32 single-byte characters.
Note • The default of the system administrator's user ID is “11111”.
1
Select [System Administrator
'
s Login ID].
2
Select [On].
3
Select [Keyboard].
4
Enter the system administrator
'
s ID with up
to 32 characters, and then select [Save].
5
Repeat steps 3 and 4 to re-enter the same
system administrator
'
s ID in [Re-enter
System Administrator's Login ID].
6
Select [Save].
7
A confirmation window appears. Select [Yes] to confirm your entry.