7
GUN HOLDER INSTALLATION
The two holes on the top of the
holder require the black screws
and washers included with this
hardware. These screws fit into
Threaded Inserts in the Metal
Case. Do not overtighten – snug
is fine.
The single Silver-Colored Screw must be installed to the single side
hole of the Gun Holder. Once again, please do not overtighten this
screw – snug is fine.
GUN HOLDER USE
Place the Hose Connector #11 (base of the Applicator’s Handle) over
the shaft of the Gun Holder shown in above illustration. Please ensure
it is fully set down to the base of the shaft. The Applicator will now sit
stationary. The Applicator can be left on the Holder for any length of
time. It is a convenient resting place between spray tans.
studioTAN™ and salonTAN™
soloTAN™
The SoloTAN turbine conveniently has a
built-in gun holder on the top of the machine.
The slot will house the cup with applicator
securely when not in use. Transporting the
turbine unit with applicator in the slot is not
advisable.
Gun Holder