23
10) Turbine keeps shutting off at the breaker switch
• Check the Filter(s) is clean and in place properly
• Check the Air Hose for any kinks that may restrict air flow
• The Turbine is overheating due to over usage. Leave the Turbine
off for a few minutes to cool down. If necessary, reset the breaker
switch, then try turning on again
• Replace breaker if still not turning on
11) Little to no solution coming out
• Fluid Knob #7 is turned in too far - turn out to allow more Solution
flow
• Fluid Coupler is clogged:
a) Remove the Cup Assembly
b) Use the supplied cleaning brush to unclog the inside of the Fluid
Coupler with soapy water
c) Use the brush to also clean the out the solution passage at the
bottom of the Cup