– 15 –
7
List of parameters
100%
0%
3
0
1200
1
2
1
1
Note2
Note2
0
0
H
0
0
5
0
0
0
Note1,2
Note1,2
Note1,2
Note1
Table2
Alarm set value
1 setup
Set the alarm 1 activation value.
It may be set within the input range.
Parameter
indication
Level
Level 4
Level 2
Level 3
Parameter name
Function
Default
setting
Remarks
Input type
Range lower limit setup
Selection of input type
Setup of lower limit of the input range
(set range: 0-1999)
Setup of upper limit of the input range
(set range: 0-1999)
Burn-out direction
Set the swinging direction at the time
of burn-out.
(set range: upper limit = H, lower limit = L)
Power ON delay time
Setup of power ON delay time
power ON delay:
Delay time until output inhibition is
canceled after power
ON (set range: 0-120 seconds)
Alarm type 1
Select the type of alarm activation.
(set range: 0-8)
Alarm type 2
Setup lock
Select whether parameter setup
change is permitted or not.
LoC = 0: Setup change is permitted for
all parameters.
LoC = 1: No setup change is permitted
for all parameters.
LoC = 2: Alarm set value 1 (ST1) and
alarm set value 2 (ST2) only
may be set.
Range upper limit setup
Alarm 1 hysteresis width
Set the ON/OFF hysteresis width of
the alarm output.
(set range: 0-110%FS of the input range)
Alarm 2 hysteresis width
Alarm 1 ON delay time
Set ON delay of the alarm output.
(set range: 0-120 seconds)
Alarm 2 ON delay time
User SPAN adjustment
Shift the input SPAN side.
(set range: -50-50%FS of the input range)
Input filter time constant
Set the time constant.
(set range: 0-90 seconds)
PV offset
Shift the display of the process value (PV).
(set range: -10-10%FS of the input range)
ST1
ST2
Pn2
PSL
b r n
oPd
PA1
PA2
LoC
PSU
HY1
HY2
Pd1
Pd2
AJS
POF
AJO
User ZERO adjustment
Shift the input ZERO side.
(set range: -50-50%FS of the input range)
Alarm set value 2 setup
Set the alarm 2 activation value.
It may be set within the input range.
Note1
Table2
Table1
Table1
