Connection and cabling/wiring of the copy adapter
• Do not handle the inverter and/or the cable connector with wet hands.
Doing so could cause electric shock.
• Before connecting the copy adapter’s cable connector, first turn off the inverter, wait more than 5 minutes, and make sure that the DC link bus
voltage between the terminals P (+) and N (-) has dropped below the safe voltage level (+25 VDC), using a multimeter.
Otherwise electric shock could occur.
• A high voltage is present on the inverter’s connector and neighborhood. Do not remove the cover for the control circuit terminal block (TB) while
power is applied.
Doing so could cause electric shock.
• Be sure to keep the copy adapter’s cable away from the live main circuit terminals.
An accident or electric shock could occur.
Disposal
•
Handle this copy adapter as an industrial waste when disposing of it.
Otherwise injuries could occur.
Others
• Never attempt to modify the copy adapter and/or inverter.
Doing so could cause electric shock or injuries.
GENERAL PRECAUTIONS
Drawings in this manual may be illustrated without covers or safety shields for explanation of detail parts. Restore the covers and shields in the
original state and observe the description in the manual before starting operation.
ii
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]
