Fubag WHS 190 DC Operator'S Manual Download Page 3

- 2 -

-

-

5

-
-

-
-
-

-

Always make a pre-operation inspection before you start the engine. You

may prevent an accident or equipment damage.

Place the generator at least m away from buildings or other equipment during operation.
Operate the generator on a level surface. If the generator is tiled, fuel spillage may result.

Know how to stop the generator quickly and understand operation of all the controls.Never permit

anyone to operate the generator without proper instructions.

Keep children and pets away from the generator when it is in operation.
Keep away from rotating parts while the generator is running.

The generator is a potential source of electrical shocks when misused; do not operate with wet

hands.

Do not operate the generator in rain or snow and do not let it get wet.

- The power generator is a mains replacement that generates electrical power for supply to a mobile

distribution system.

- The power generator must be operated outdoors within the prescribed voltage, output and rated
speed limits (see type plate).
- The power generator must not be connected to other electrical supply systems or electric generation
systems (e.g. other power generators).
- The power generator may not be used in environments where there is a risk of explosion.
- The power generator may not be used in environments where there is a risk of fire.
- The power generator must be operated in accordance with the conditions set out in the technical
documentation.
- All improper use of the power generator including all uses not described in these instructions will
constitute unauthorized incorrect usage for which the manufacturer is not legally liable.
- Operation in environments where there is a risk of explosion and fire.
- Operation in enclosed areas and under direct exposure to rain or snowfall.
- Operation without the requisite safety precautions and connected to existing supply network
systems.
- Spraying with high-pressure cleaners or fire extinguishing equipment.
- Non-compliance with regular servicing requirements.
- Failure to carry out measurements and checks for early detection of defects.
- Know and apply the Prevention of Injury regulations and the safety instructions for the power
generator.
- Understand and be able to practically implement the technical documentation.
- The operator must know the functions of, and be able to use, the components of the power generator.
- The operator must wear the appropriate personal safety equipment.
- The labelling on the electrical generator must be complete and maintained in a readable condition.
- Constructive changes may not be carried out on the electrical generator.
- The rated speed of the motor has been set during manufacture and may not be changed.
- The operating safety and correct functioning must be checked before and after each use.
- No naked flames, lights or spark-emitting appliances may be used within the hazard area of the
power generator.
- Smoking within the hazard area of the power generator is strictly forbidden.
- During operation, the power generator must be protected from dirt and foreign matter.
- The power generator may only be transported when cold.
- The power generator may only be lifted using the carry handles intended for this purpose.
- The electrical safety must be checked before each operational use.
- The appliance may not be covered. The air intake may not be blocked or obstructed.
- When starting, the load may not be connected.
- Only certified and approved cables may be used for the wired network.
- The power drawn may not exceed the maximum rated power.

www.fubag.ru

O

m

perator's

anual

WARNING!

Summary of Contents for WHS 190 DC




























Reviews: