Fubag WHS 190 DC, Operator'S Manual

Page: 12 / 27

Clianing fuel strainer
Dirt and water in the fuel are removed by the fuel strainer.
1. Remove the strainer cup and throw away water and dirt.
2. Clean the screens and strainer cup with gasoline.
3. Tightly fasten the cup to main body, making sure to avoid
fuel leak.
7. Preparation for storage
Certain operations must be carried out on generating sets
which are to remain unused for a long period of time, in order
to keep them in good condition. Check that the storage area
is not dusty or humid. Clean the exterior of the generating set
and apply a rustproofing product.
- Drain fuel from fuel tank carefully. Gasoline left in the fuel
tank will eventually deteriorate making engine-starting
difficult.
Loosen the drain screw on the bottom of the carburetor float
chamber, and drain the fuel completely.
Change engine oil.
Check for loose bolts and screws, tighten them if necessary.
Clean generator thoroughly with oiled cloth. Spray with
preservative if available.
- Pull starter handle until resistance is felt, leaving handle in
that position.
Store generator in a well ventilated, low humidity area.
-
-
-
-
-
- 11 -
www.fubag.ru
O m perator's anual
BODY
SCREEN 2
GASKET
CUP
SCREEN 1
DRAIN
FUEL