Fubag PG 950 T, Operator'S Manual

Page: 7 / 25

- 6 -
Fuel level
Only use clean fuel without any water. Do not overfill the tank (there should
not be any fuel in the filler neck).
After filling, always check that the plug is fitted properly on the tank. If fuel has
been spilled, make sure that it has dried and that the fumes are dissipated
before starting the motor pump set.
Visually check the fuel level. Top up if necessary:
Close the fuel tap.
Remove the fuel tank plug.
Fill the fuel tank with a funnel, taking care not to spill any fuel.
Tighten the plug on the tank.
Open the fuel tap. 1.
2.
3.
4.
5.
Assembly of pipings
Never use the motor pump without the appropriate strainer (risk of pump
deterioration).
Always ensure that the sealing joints of the couplings are firmly in place (risk
of poor suction of the liquid).
1. Pass the pipe fixing clamps (no. 6)
around the suction & discharge hoses.
Mount the hose couplings (no. 5) on the
suction (no. 2) & discharge of the pump
(no. 3).
Fix the suction & discharge hoses on
their respective couplings using the pipe
fixing clamps.
Place one of the pipe fixing clamps
around the other end of the suction hose.
Attach the strainer (no. 4) at the end of
the suction hose.
Fix the strainer with a pipe fixing clamp.
2.
3.
4.
5.
6.
www.fubag.ru
O m perator's anual
WARNING!
WARNING!