700-RAOS-Man Rev 5 24 Feb 2020
Page 20/31
Power connections are made to the
ports on the back of the portable power
station. The military connector ports are
protected with caps which should remain
secured until the
port is in use.
3.6
POWERING THE STATION
Figure 3-2: Cabinet equipment with close-up view of breaker
1)
Once all power connections as previously outlined are completed, move the telemetry
selection switch to the desired position (CELL or SAT).
2)
Flip the breaker up to the ON position. The on-board computer’s power LED on should turn
green.
WARNING!
In satellite mode, transmissions start 30 seconds after power is supplied.
S
TAY AT LEAST 1 M CLEAR OF THE FRONT OF THE ANTENNA
TO AVOID RF RADIATION.
RISK OF
EYE
INJURY!
DO NOT LOOK DIRECTLY INTO THE IR CAMERA LEDs AT CLOSE RANGE
Solar input
port
Cabinet
power
output port
Telemetry
switch
ON
OFF
