700-RAOS-Man Rev 5 24 Feb 2020
Page 12/31
2.1.1
MODEM LEDS
There are four LED lights which indicate the status of the Network, Signal, Activity and Power.
LED
COLOUR
INDICATES
LED POWER
SAVING
MODE
Power
Off
No power or input voltage ≥ 36 VDC or ≤ 7 VDC
Solid Green
Power is present.
Green with
Amber Flash
Power is present and the gateway has a GPS fix.
Solid Red
Standby mode
Flashing Green
When you press the reset button, flashing green indicates when
to release the reset button to reboot the gateway.
Flashing Red
When you press the reset button, flashing red indicates when to
release the reset button to reset the gateway to the factory
default settings.
Flashing Amber
When you press the reset button for more than 20 seconds,
flashing amber indicates when to release the reset button to enter
Recovery mode.
Signal
Solid Green
Good signal (equivalent to 4 – 5 bars)
Off
Solid Amber
Fair signal (equivalent to 2 – 3 bars)
Off
Flashing Amber
Poor signal (equivalent to 1 bar) If possible, Sierra Wireless
recommends moving the gateway to a location with a better
signal.
Flashing Red
Inadequate (equivalent to 0 bars) Sierra Wireless recommends
moving the gateway to a location with a better signal.
Network
Solid Green
Connected to an LTE network
Off
Solid Amber
Connected to a 3G or 2G network
Off
Flashing Green
Connecting to the network
Flashing Red
No network available
Flashing
Red/Amber
Network Operator Switching is enabled, but the gateway is unable
to locate the required firmware. For more information, refer to
the ALEOS Software Configuration User Guide (Admin chapter)
from the Sierra Wireless website
