700-SDI-RADAR-300W-Man Rev 2 30 May 2022
23
/39
Part# 21370
RADAR CONFIGURATOR
The radar configurator is a user-friendly PC application for configuring the flow meter operating
parameters. Additionally, the Configurator Utility displays current flow measurements. The
configurator can be downloaded here under SOFTWARE:
https://www.geolux-radars.com/rss-2-300-w.html
When started, the Configurator Utility displays its main window. Initially, no flow data is displayed, as
the connection to the flow meter device is not established.
5.1
CONNECTING THE RADAR TO THE CONFIGURATOR
1)
Connect the RS-232 serial cable to the radar cable as shown in Figure.5-1.
NOTES:
a) RS485 connections (orange and dark red wires) are not required for connection
to the configurator software.
b) The radar should not be powered from the Geolux SDI interface as the interface
turns the power to the radar off after a period of inactivity. Instead, the power
connections should be made directly to a +12V supply as shown in Figure 5-1.
