Fume hoods
Soldering - Desoldering
Specialized tools for wiring and tinning
Petit outillage,
consommables et équipement de l’atelier
–
+33 (0)1 40 86 00 09
–
www.ftm-technologies.com
18
8.
Manual mode window
This page is used to activate the descent and ascent movements by pressing and holding a key. To activate
a downward movement, you must first have taken an origin by pressing the "INIT" key.
Button
Description
Pressing the value allows you to modify the descent
speed (min: 0.0 and Max: 15.0mm / s)
Pressing the value allows you to modify the climb
speed (min: 0.0 and Max: 15.0mm / s)
Pressing the value on the right (20.00mm) allows you
to define a maximum relative displacement value
(value between 0 and 100mm)
The absolute position relative to the machine origin is
displayed in the central part
Pressing the key activates homing if the pressure is
maintained. The ascent will be made at high speed to
the sensor origin, then a descent, at slow speed, will
be made automatically to exit the sensor. , the
position counter will be set to 0. INIT touch will
become light blue.
Pressing the key activates the climb, if the key is held
down the maximum displacement achieved will be the
value entered on the Displacement line on the right
side (20.00mm)
Pressing the key activates the descent, if the key is
held down the maximum displacement achieved will
be of the value entered on the Displacement line on
the right side (20.00mm)
Return to the previous page
Icon indicating the presence of an active alarm,
pressing this icon allows access to the "Fault History"
page
