Fume hoods
Soldering - Desoldering
Specialized tools for wiring and tinning
Petit outillage,
consommables et équipement de l’atelier
–
+33 (0)1 40 86 00 09
–
www.ftm-technologies.com
16
7.
Parameters window
This page allows you to define the configuration parameters related to the machine.
Button
Description
Enables or disables the exchange of information
between the bath thermoregulator and the machine.
This information indicates when the bath is hot
enough and authorizes the descent into the bath (see
instructions below)
Allows you to enable or disable the detection of the
bath level by the titanium finger. When this parameter
is disabled only the manual program can be used
Allows you to define a time on the activation of the
"bath ready" information, the cycle start will be
authorized after this time has elapsed (min: 0 and
Max: 60 min)
Allows you to define a time on deactivation of the
"bath ready" information, the cycle start will no longer
be authorized after this time has elapsed (min: 0 and
Max: 60 min)
Height linked to the machine: distance between the
level of the work surface
and the upper level of the bath (+ 10.00mm safety).
This height is used to calculate the approach course
at high speed.
Icon allowing access to the next page
Return to the Programs menu page
