PAG. 22
rev 1.1
4.3. ANTENNA SETUP
Depending on how the “Antenna Connexion” section is
confi gured, it will allow confi guring different parameters:
(Fixed Antenna)
(OSD 28):
- Satellite: Press [
] to switch Satellites or press [OK] to
enter satellite list to select directly.
- LNB frequency: Use [
] in order to change among
“Universal”, a specifi c “Polarity and Band”, “Unicable” or a
specifi c frequency of the local oscillator.
Note: If you have an Unicable installation that allows you to
distribute a satellite signal through a unique cable up to 8
receivers as maximum, in this menu option you can confi gure
the receiver. If you select “Unicable”, press the [green] button
to select a center frequency to the receiver and press the [red
button to choose the frequency of a channel.
- On “Transponder” item use [
] to select the desired
transponder.
- DiSEqC1.0: Use [
] to switch the options of DiSEqC
switches.
- DiSEqC1.1: Use [
] to switch the options of DiSEqC1.1
switches.
- 22K: Use [
] to switch “ON” and “Off”. The 22 kHz sig-
nal is used in KU Universal LNBs to change between low
band and high band. After choosing LNB type “Universal”
you cannot modify 22K.
- Toneburst (0/12V): Press [
] to switch this function
“On” or “Off”.
- Polarity: Press [
] to switch between “Auto / H / V”.
(Motorized Antenna)
(OSD 29):
- LNB type: Use [
] in order to change among “Universal”
, “Unicable” or a specifi c frequency of the local oscillator.
Note: If you have an Unicable installation that allows you to
distribute a satellite signal through a unique cable up to 8
receivers as maximum, in this menu option you can confi gure
the receiver. If you select “Unicable”, press the [green] button
to select a center frequency to the receiver and press the [red
button to choose the frequency of a channel.
- Motor Type: Press [
] to select between DiSEqC1.2 and
USALS”.
- Local Longitude: Geographic length of your position
(USALS).
- Local Latitude: Geographic latitude of your position
(USALS).
- Delete all: Deletes all the satellite positions saved.
- Motor Setting: It allows confi guring all the engine positions.
- Limit Setup: It allows confi guring the East and West position
of the engine.
Press [Exit] to save the changes.
•
•
OSD 28
OSD 29
OSD 30
INSTALLATION
ENGLISH
Summary of Contents for MAX S400 HD PLUS
Page 1: ...MAX S400 HD PLUS...
