FT Technologies FT702LT, Manual

Page: 31 / 60

Section 6 Parameter Settings
31
FT702LT Flat Front Wind Sensor Manual
6.1.2 Query Commands
Figure 28 lists the commands that may be sent to the FT702LT from the host computer that are used to QUERY
the wind sensor
’s latest readings or configuration.
Command Mnemonic Sensor Data Returned Section
Serial interface baud rate BR 1200, 2400, 4800, 9600, 19200, 38400 6.4.1
Datum offset CF 000.0° to 359.9° 6.4.2
Continuous update CU
Enabled or Disabled
Update interval, 0.2-12000 seconds
6.4.3
Wind velocity data format DF Polar or NMEA 6.4.4
Runtime Counter DG Number of hours of runtime* 6.4.5
Command delay interval DL 00 to 20 6.4.6
Error report ER Factory Report 6.4.7
Wind velocity filter FL
Enable or Disable
Speed filter length, 1-64*
Direction filter length, 1-64*
6.4.8 &
6.4.9
Heater settings HT
Setpoint Temperature, 0°C to 44°C
Setpoint Temperature, 44°C to 55°C*
Percentage of heater current, 0% to 100%
Internal sensor temperature, 00°C to
±99°C,
Heater Delay Time, 4s to 999s *
Current Limit, 0.1A to 6.0A*
Undervoltage Limit, 9V to 17V*
6.4.9 &
6.4.11 &
6.4.12
Listener and talker identifiers ID
Listener ID = xx
Talker ID = xx
6.4.13
Min/Max wind speed MM Min & Max Speeds Recorded 6.4.14
Parameter Report PR Factory Report
#
6.4.15
Serial Number SN Serial Number
#
6.4.17
Software Version SV Software Version 6.4.18
User Calibration Table UC
Enabled or Disabled*
Wind speed table record*
Table label*
6.4.19 &
6.4.20 &
6.4.21 &
6.4.22 &
6.4.23
Saved User Parameters US
Matches Saved to Current User
Parameters*
6.4.24
Wind velocity reading WV Wind Speed, Direction and Sensor Status
6.4.25 &
6.4.26
Figure 28: Query Commands
# Feature only available from build version 20 and above
* Feature only available from build version 22 and above