3 |
P a g e
PROGRAMMING FOR CONTACT ID
No special programming is required for use with an
alarm panel sending Ademco Contact ID
The Hawk will respond to any telephone number sent by
the alarm panel.
The alarm panel can be programmed to send ALL
ACCOUNT CODES or only the codes required can be
programmed into the panel.
Any account code can be programmed into the panel.
The transmitter will send its own account code.
The Hawk will send full Contact ID messages (all codes,
partitions and zones) using the Fast FSK protocol
INSTALLATION
Opening the Hawk Cover
The plastic cover on the Hawk is opened by inserting a small
flat screw-driver into the two openings at the top of the cover.
Gently pull the top of the cover away from the base and then
insert the screw-driver into the two bottom openings to
completely remove it.
