Operation guide for the F-DI1.25VHP ECU / heat pump
There are no user serviceable parts within the ECU and the user should not
attempt to service the ECU in anyway.
•
Failure to use a grounded electrical outlet could result in an electrocution
injury.
•
Disconnect unit from electrical outlet before performing any service or
maintenance.
•
A qualified service facility or technician should only carry out any service
that the ECU requires.
•
The ECU has very high operating pressures, moving parts and high
electrical voltages and current that can do bodily injury or can kill an
untrained person, all warning labels should be read and complied with.
Basic setup
Position the ECU in the required location to allow for the supplied ducting to
be connected to the shelter and the installation of the power supply and
control cabling. There should be adequate clearance on all sides of the ECU
to allow for adequate airflow around the ECU to aid in proper operation, a
minimum of 2 feet on all sides should be maintained.
The ECU is best positioned on level even ground to allow for proper drainage
of condensation removed during the cooling cycle.