FSD International
Commander 115 TC
Pilot Operating Handbook
- 29 –
Copyright© 2008 by FSD International. All rights reserved.
For use with Microsoft Flight Simulator only. Not to be used for real-world aviation.
9.
Landing Gear Limit Switches (2) -
INSPECT
10.
Chocks - REMOVE
11.
Right Wheel Well Fuel Drain -
DRAIN AT LEAST 1 CUPFUL, visually inspect
12.
Check valve CLOSED.
RIGHT WING TRAILING EDGE
1.
Aileron -
CHECK freedom of movement & security.
2.
Wing Flap --
INSPECT
PREFLIGHT INSPECTION - NOSE
1.
Fuel Gascolator
DRAIN AT LEAST 1 CUPFUL, visually inspect
2.
Check
valve
CLOSED.
3.
Exhaust Tailpipe -
CHECK SECURE
4.
Nose Gear, Tire & Wheel Well
INSPECT
5.
Nose Gear Limit Switches
INSPECT
6.
Propeller & Spinner -
INSPECT
7.
Engine Cooling Air Inlets -
CHECK UNOBSTRUCTED
8.
Engine Induction Air Inlet -
CHECK UNOBSTRUCTED
9.
Cowl Flap -
CHECK POSITION & SECURITY
10.
Oil Quantity - CHECK.
minimum
6
quarts
11.
Chocks -
REMOVED & STOWED
LEFT WING LEADING EDGE
1.
Fuel Vent -
UNOBSTRUCTED
2.
Wing
Tie-Down
-
REMOVE
3.
Fuel Quantity -
CHECK VISUALLY for level
[NOTE: A reduced fuel indicator is located in the fuel filler neck to show a useable fuel quantity of
approximately 24 gallons].
4.
Fuel Filler Cap -
SECURE
5.
Fuel Tank Sump -
DRAIN AT LEAST 1 CUPFUL, visually inspect
6.
Check
valve
CLOSED.
7.
Right Main Gear, Tire, & Wheel Well-
INSPECT
8.
Landing Gear Limit Switches (2) -
INSPECT
9.
Chocks - REMOVE
10.
Right Wheel Well Fuel Drain -
DRAIN AT LEAST 1 CUPFUL, visually inspect
11.
Stall Warning Vane -
CHECK freedom of movement & audible horn
[NOTE: The aircraft battery master switch must be ON to check stall horn. Then move the STALL
CKT switch in the left wheel-well from the NORM to the spring loaded TEST position while the stall
vane is moved upwards].