FSC A320 SIDESTICK PRO OEM Instructor User Manual Download Page 181

Page: 181 / 329

Instructor User Guide

REFERENCE AIRPORT Tab

REFERENCE AIRPORT Tab

13 Oct 2017

Page 147

9.13.2.1

TAKEOFF PROFILE Section

This section lists all available predictive windshear takeoff profiles which are
mutually exclusive.

9.13.2.1.1 Tailwind Increasing to XX kt

Tap this radio button to activate the predictive windshear profile described below:

•

Tailwind increasing to XX kts.

•

Windshear position will be initialized at 3,000 feet from the runway threshold on
takeoff.

9.13.2.1.2 Tailwind Increasing to XX kt, along with varying updrafts, downdrafts, and

crosswind

Tap this radio button to activate the predictive windshear profile described below:

•

Tailwind increasing to XX kts, along with varying updrafts, downdrafts, and
crosswind.

•

Windshear position will be initialized at 6000 feet from the runway threshold on
takeoff.

9.13.2.1.3 Tailwind Increasing to XX kt, along with downdraft

Tap this radio button to activate the predictive windshear profile described below:

•

Tailwind increasing to XX kts, along with downdraft.

•

Windshear position will be initialized at 6000 feet from the runway threshold on
takeoff.

9.13.2.2

LANDING PROFILE Section

This section lists all available predictive windshear landing profiles which are
mutually exclusive.

9.13.2.2.1 Headwind Increasing to XX kt, switching to XXX kts tailwind, along with

varying updrafts, downdrafts and crosswind

Tap this radio button to activate the predictive windshear profile described below:

•

Headwind increasing to XX kts, switching to XXX kts tailwind, along with
varying updrafts, downdrafts and crosswind.

•

Windshear position will be initialized at 12000 feet, 2nm before the runway
threshold on approach.

Summary of Contents for A320 SIDESTICK PRO OEM










































































































































































































































































































































Search results

Summary of Contents for A320 SIDESTICK PRO OEM

Reviews:

Related manuals for A320 SIDESTICK PRO OEM

Brands by name

Popular brands

FSC A320 SIDESTICK PRO OEM, Instructor User Manual

Search results

Summary of Contents for A320 SIDESTICK PRO OEM

Reviews:

Related manuals for A320 SIDESTICK PRO OEM

Brands by name

Popular brands