FS FOPM-107, Quick Start Manual

Page: 19 / 65

1. MPO Mode
(1) Insert Loss Test
Press thebutton to enter the main menu as shown in Fig. 1.
Press thebutton / to select mode and press to enter. Select MPO
mode and press to confirm, and then select line order. After entering, select
the type to be tested (such as A-Type).
Press the button / to select the Threshold setting. The buttons ,
, and could adjust the threshold, as shown in Fig. 2.
(2) MPO Line Sequence Test
When the type of MPO jumper under test is unknown, press the button to
switch to the line sequence test function, and press the button to test the
line sequence. The obtained line sequence will be automatically modified in the
MPO test. The test results are displayed in the area after Type. If communication is
interrupted, it will prompt: link timeout!
Menu
Enter
Enter
Operation Instructions
λ
Units
Enter
Fig. 1 Main Menu
Main menu
Select mode
Select line order
Threshold setting
Laser options
Historical records
Language setting
About me
Fig. 2 Threshold Settings
Threshold
00.00
dB
λ
Units
λ
Units
NOTE: please confirm that works on MPO light source interface, not
menu or other interface when testing line sequence.
18
EN