FS FOPM-107, Quick Start Manual

Page: 17 / 65

EN
ESC: Exit the "record view" interface ( same as press )
X: Select one or more than one recording to delete
RST: Reset the recording memory, this operation is not reversible and it'll take 5
seconds to complete with power supply can not be disconnected, otherwise it
may damage the chip of tester.
At the "record view" interface, press the button to move "X" upward one
step, press the button to move "X" downward one step. In Fig. 10, the
interface explains that there are totally 3 testing results inside, "low" means the
saving power value is lower than the value of the threshold setting. In Fig. 11,
"high" means the saving power value is higher than the value of the threshold
setting. The digital means the power value of corresponding wavelength.
MODE
dBm/dB
FOPM-107
λ
Menu
Enter
Units
Ref
Optical MPO Power Meter
16