UHC-HD
3-3
4.3 Changing Row Setting
Press the row mode button on the right side of the cabinet. The displays on the selected row cycle
through menu choices, clean mode and off. With the desired choice displayed, press the OK button
on the keypad. The master control will display the menu choice or
Mixed
if there is more than one
menu in use on the cabinet.
4.4 Cook Now Prompts
The Cook Now prompt appears at a preset time prior to the expiration of the last tray of a specific
product. No acknowledgement is necessary. The display of
CooK NOW
serves as a reminder to
cook more of the needed product.
4.5 Using Clean Mode
Press the menu key until Clean Mode is displayed. Press the OK key. If there are active timers, the
cabinet will not allow Clean Mode to be chosen with the menu key. With no active timers, the
selection of Clean Mode will put the entire cabinet in Clean Mode.
The names change on all row positions. The setpoint for all rows becomes 125°F (52°C). The
displays show
SLOT CLN MODE
and
NOT SAFE YET
until the temperature of the slots reaches 125°F
(52°C). The display becomes
CLEAN
.
4.6 Turning Slots OFF
Press the far right row mode key until OFF is displayed. Press the OK key on the keypad.
4.7 Reducing Hold Time
The hold-time can be reduced in five minute increments by pressing and releasing the timer key on
an active slot. This is done to delete time an item was held in another holding cabinet.
4.8 Temperature Display
Press the temperature button on the cabinet and the left row of displays show top and bottom
temperatures
Top plate temperature
Bottom plate temperature
4.9 Temperature Alarms
There are four Temperature alarms:
High Temperature
Low Temperature
Sensor
Rise Time
If an alarm condition occurs, an audible alarm sounds and the display alternates between the product
selection and the alarm message. Timers cannot be started if a slot is displaying an alarm message.
