UHC-HD
3-2
The UHC-HD is ready for operation out of the box, with the slots set for routine menu
configurations.
4.1 Cabinet Operation
1.
Turn the power switch ON.
2.
The displays will light and show
LOW TEMP
,
changing to product names when the cabinet is at
temperature.
3.
Load product in the appropriate row and press the timer button. The brightest displays indicate
the slots with the least remaining hold time.
4.
Press the far right row mode key to change menu on the row, turn the row off, or set it to clean
mode. Press OK button to accept change.
3.2 Timer Operation
Press the timer key adjacent to the desired slot.
The button brightens; the product name also
brightens if it is the first or only selection of that menu item. The brightness of the menu item display
indicates the position with the least remaining hold time. Buttons brighten on positions for the same
product as they are pressed. The menu name will remain dim until it is the row position with the
least remaining hold time.
Timer Display Sequence
Bright button, bright display on row position with least holding time; bright button for row
positions with the same product.
Cook Now
XXXXX
with a continuous beep at the end of timer cycle; press timer button to cancel alarm.
Stopping the Timer
Press the timer key next to the row position to turn a timer off.
The timer stops and the timer
button dims. The display of the next appropriate row position brightens.
A bright button and a bright menu item display indicate the row position to use first. A bright button on a
row position indicates it is active, but not the position with the least remaining hold time. Its menu name
will brighten when it becomes the position with the least remaining hold time.
