Frymaster FilterQuick FQG30, Service Manual

Page: 43 / 80

1-38
22. Close dispose valve ensuring the handle is pushed completely towards the fryer.
23. “Fill Vat From Bulk? Yes/No” is displayed.
24. Press “Yes”.
25. “Press and Hold Yes Arrow to Fill” alternating with “Yes” is displayed.
26. Hold down “Yes” to fill pot to desired level.
27. “Filling” is displayed while button is depressed.
28. “Continue Filling Yes/No” is displayed
29. Press “Yes” to continue filling or “No” to Exit program.
*
NOTE
: If the waste tank is full, the controller displays “Waste Tank Full.” Call bulk oil provider.
DISPOSE TO WASTE:
1. Hold down “Filter” button until controller beeps twice.
2. Scroll to “Dispose” using “Right Arrow" button then press “  ” button.
3. “Dispose? Yes/No” is displayed.*
4. Press “Yes” to dispose of oil in pot.
5. “Start Dispose” is displayed with blinking LED.
6. Pull the drain handle
7. “Draining” followed by “Flushing” is displayed.
8. “Vat Empty? Confirm” is displayed.
9. Press “Confirm”.
10. “Close Drain” is displayed with blinking LED.
11. Push the drain handle in towards the fryer.
12. “Open Dispose Valve” is displayed.
13. Open dispose valve by pulling completely forward to start disposal.
14. “Disposing” is displayed for four minutes.
15. “Remove Filter Pan” is displayed.
16. Slide the filter pan slightly out of the fryer.
17. “Is Pan Empty? Yes No” is displayed.
18. Press “Yes” if filter pan is empty. Select “No” if pan still has oil in it.
19. “Insert Filter Pan” is displayed.
20. Insert the filter pan.
21. “Close Dispose Valve” is displayed.
22. Close dispose valve ensuring the handle is pushed completely towards the fryer.
23. “Fill Vat From Bulk? Yes/No” is displayed.
24. Press “No” if you wish to leave pot empty and exit.
*
NOTE
: If the waste tank is full, the controller displays “Waste Tank Full.” Call bulk oil provider.
FILL VAT FROM BULK:
1. Hold down “Filter” button until controller beeps twice.
2. Scroll down to “Fill Vat from Bulk” using “Right Arrow" button then press “  ” button.
3. “Fill Vat from Bulk? Yes/No” is displayed.
4. Press “Yes”.
5. “Press and Hold Yes to Fill / Yes” is displayed.
6. Press and hold down “YES” to fill pot to desired level.
7. “Filling” is displayed during fill.
8. Release button to stop filling.
9. “Continue Filling? Yes/No” is displayed.
10. Press “NO” to exit.
FILL JUG FROM BULK:*
1. When “Top Off Oil Empty” is displayed, the top-off jug is empty.
2. To refill jug press and hold the orange reset button above the jug until the jug is full.
3. Release the button to stop filling.
*NOTE: The jug may not fill if any of the following are in progress:
If FILTER NOW? YES/NO, CONFIRM YES/NO, or SKIM VAT is displayed, the fill jug button is disabled until either a
filter is complete or until no is chosen.