Surface Mounting and
Mounting Hole Locations
2.75 (7)
1.27 (3.2)
16.62 (42.3)
Floor
Front View
With Door Open
8.00
(20.3)
1.48 (3.8)
2.45 (6.2)
3.94
(10)
32 (81.3)
8
(20.3)
20.25 (51.4)
21.3 (54.1)
Always use the restraint system.
Keep one hand on the child at all times.
Avoid serious injury
from falling or
sliding out.
Never leave
a child
unattended.
Ne jamais laisser un enfant sans
surveillance.
Evitez les blessures sérieuses causées
par le glissement. Toujours ultiliser le
system d’attaches.
Conçue pour les jeunes enfants
seulement d'âge jusqu'à 3.5 ans et
pesant moins de 23 kg. (50lbs.). Gardez
une main sur l'enfant en tout temps.
Never leave a child unattended.
Avoid serious injury from falling
or sliding out. Always use the
restraint system.
Designed for Infants Only. Age
up to 3.5 years and weighing less
than 50 lbs. (23 kg). Keep one
hand on the child at all times.
WARNING
WARNING
WARNING
AVERTISSEMENT
AVERTISSEMENT
AVERTISSEMENT
36.90 (93.7)
Rear View
39.5 (100) Max.
35.5 (90) Min.
32 (81.2)
4.4.1 Maximum Protruding Objects
4.2.5 Forward Reach
4.2.6 Parallel Approach
4.27.4 Operation
ADA Compliant when observing maximum
and minimum mounting heights.
19
(48.2)
Top View
Surface Mounted
Surface Mounting
1) Drill lower pilot holes (level) into
studding at 32" centres. Insert
first two (2) screws to 1/4" (6mm)
distance from wall (Fig. A).
2) Hang unit off of the lower
mounting screws (screw heads
will fit through “keyhole”, Fig. A).
Tighten screws, adjust level of
unit if required during tightening.
3) Drill and insert last two top
mounting screws.
4) Remove tape, flip up recessed
panel and insert two (2) machine
screws (Fig. B) to secure
recessed panel to complete
installation.
Floor
Mounting at maximum height
results in this dimension being
34" (86.5), recessed & surface.
Recessed
mounting hole
locations
Cradle and recessed panel
remain taped together during
installation.
Remove tape, flip up recessed
panel, insert and fully tighten
two (2) 1/2" long machine
screws using Phillips screw
driver.
Studding at 32" centres
Fig. A
Fig. B
2 (5.0)
1/4"
Product information to
supply when emailing
registration, (see page 2)
Frost Products Ltd., 5280 John Lucas Dr., Burlington, Ontario, L7L 5Z9, Canada, Ph.: 905.332.5700 www.FrostProductsLtd.com
Summary of Contents for 1124-S
Page 1: ......
