Instructions
Operation:
Pulling on the handle rotate door downward. Place the infant on top of
the changing surface and use belt restraining system, see instructions
below.
WARNING!
AVOID SERIOUS INJURY FROM FALLING OR SLIDING
OUT. ALWAYS USE RESTRAINT SYSTEM.
Use of belt restraint system:
If buckle is closed press on the area in mid buckle as shown on left to
open and unlatch the buckle. Place child so restraint strap is located at
the abdomen area. Relatch strap. Adjust strap if required to insure that it
is snug against infant.
WARNING!
NEVER LEAVE CHILD UNATTENDED.
After the child has been changed, remove the restraining belt and rotate
door back up against the wall.
WARNING!
The unit is rated for 50 pounds (22.7 kg). The addition of
items such as parcels or accessories to the unit or to the bag hooks must
not exceed the total weight limit of 50 pounds (22.7 kg). Failure to do so
may cause the unit to be unstable or create a hazardous condition to the
end users.
Maintenance and cleaning:
1) Check for missing or damaged components on a monthly basis or as
required depending on traffic flow. All hardware and the unit's fitting to
the wall should be tight.
2) Take the unit out of service if any component is vandalized, missing or
damaged. Contact your authorized dealer to order replacement parts.
Do not substitute parts.
3) Apply a mild soap or multi-purpose cleaner (non abrasive) by means
of a damp cloth. Do not allow liquids to pool or soak in any areas of
the changing station. Strong chemical cleaners or cleaning agents
may be hazardous to children, do not use these strong cleaners.
4) Upon delivery check for damage from shipping or handling to job site.
WARNING! Do not install a damaged unit!
Press inwards
Pull apart to unlock
Table of contents
Page 1
Operational use and care instructions
Page 2
Overview
Page 3
Recess mounting
Page 4
Surface mounting, mounting hole locations
READ ALL INSTRUCTIONS BEFORE THE ASSEMBLY
AND MOUNTING OF THE DIAPER CHANGING STATION.
Summary of Contents for 1124-S
Page 1: ......
