Overview
Code 1124-S Installation Instructions
This document covers the recessed and surface mounting of the
Code 1124-S stainless steel baby changing station.
Note:
Follow the “
in the installation instructions. Failure to do
WARNING!”
so may result in serious injury or death. Read all instructions before
installing the baby changing station. Keep these instructions for
future use.
READ ALL INSTRUCTIONS BEFORE THE ASSEMBLY AND
MOUNTING OF THE DIAPER CHANGING STATION.
Unpack carton and identify the following parts.
PART
Type:
Quantity:
3” x 1/4” wood screw
Phillips head
4
1-1/2” x 1/4” wood screw
Phillips head
2
10-24 x 1/2" machine screw
Phillips head
2
WARNING!
MUST BE INSTALLED BY A QUALIFIED TRADES PERSON.
WARNING!
The diaper changing station is no stronger than the walls to which they are attached and
therefore the unit MUST be firmly secured in order to support the weight it is intended to carry. Contact
the building contractor or Architect if there are any questions.
WARNING!
The unit is rated for 50 pounds (22.7 kg). The addition of items such as parcels or
accessories to the unit or to the bag hooks must not exceed the total weight limit of 50 pounds (22.7 kg).
Failure to do so may cause the unit to be unstable or create a hazardous condition to the end users.
Clean up:
After the installation is completed remove and dispose of all protective plastic from the
surface of the product. Also dispose of all bags and loose clear tape. Save this instruction sheet for
future reference. Please save the foam and carton in case of product return.
Product Return:
Call Frost Products Ltd. customer service (1.905.332.5700) to receive a
Return Authorization Number. Product returns will only be accepted in the original packaging
with the original foam padding. Do not include the hardware in the product return carton.
Tools required:
Level
Measuring tape
Power drill
3/16” taper length drill bit (5-3/4" long)
Phillips driver bit for power drill
Phillips screw driver
Product
info.
Registration:
To register your product, email the information listed below to
our dedicated email address: [email protected]
Please provide the following in your email:
1) Your organization’s contact name, phone number and email adress
2) The Model Number
3) The Batch/W.O.#
See illustration on right for location of product info.
Summary of Contents for 1124-S
Page 1: ......
