INSTALLATION AND MAINTENANCE MANUAL
TRANSLATION OF THE
ORIGINAL DOCUMENT
For additional copies visit:
www.frost-trol.com
GREGAL
SOLID LINES
D008270
Versión: 2
-13-
2.5.
ASSEMBLY
When assembling lines that consist of more than one unit, the units should be
assembled in the correct order, i.e. their positions correspond with the numbers
indicated on the side of each unit (e.g. 4 in position 4, 3 in position 3.).
When the units' final positions have been determined, you may proceed to fit them
together, either manually or mechanically be careful to ensure that no pressure is
exerted on fragile components, such as glass, insulation glass or other weak
components.
When welding the refrigeration tubes, take particular care to protect the parts of
the unit that could be damaged by the heat produced from the welding.
All tube and cable fittings should be sealed from the outside to ensure that they
remain completely waterproof.
Tools and materials needed:
Summary of Contents for GREGAL
Page 4: ......
