Appendix A:
Control commands for the
Smart Receiver
The following commands can be used in Actions to control how a FrontRow ICR-01 Smart Receiver amplifier/switch
handles audio:
ICR-01 Smart Receiver / Juno Connect Master Volume Commands*
Syntax:
#AUDn[Mute,Volume];
Name
Required/Optional
Data Type
Format
Description
n
Required
Constant
1
Denotes the sub-device. Since the
ICR-01 has only one sub device,
this is always 1
Mute
Optional
Variant
M
Command
where
Command
is 0, 1, or +
Audio mute:
• off (0);
• on (1); or
• toggle (+)
Volume
Optional
Variant
V
Command
where Command is an integer
from 1 to 100, +, or -. The + or
- may be followed by a single
digit (1-9) indicating the change
in volume steps to be made. If
no digit is entered, the volume
will increment by one.
Sets the audio volume to:
• the percentage of maximum
volume corresponding to the
integer used;
• an increase in volume (+) by
n
steps (+
n
); or
• a decrease in volume (-) by
n
steps (-
n
)
Examples:
Unmute and increase volume: #AUD1[M0,V+];
Unmute and decrease volume by 2 steps: #AUD1[M0,V-2];
Set volume to 10% of maximum: #AUD1[V10];
Mute: #AUD1[M1];
Unmute: #AUD1[M0];
Toggle mute: #AUD1[M+];
Query current settings (returns value of input, mute, and volume): #AUD1[];
*For complete programming guidance, refer to the Calypso Action Control Language (CACL) manual found on the
Guides and Resources page. www.gofrontrow.com/guides-resources.
25
Summary of Contents for ezRoom ICR-01
Page 1: ...ICR 01 Smart Receiver INSTALLER GUIDE ...
Page 30: ...27 ...
