10
Set gain and channel, and install battery
1. Unscrew battery door to open
battery compartment
2. Set gain as follows:
High:
If majority of users will hold the
microphone far from the mouth
Mid (recommended):
For most uses
Low:
If majority of users will hold the
microphone close to the mouth
3. Set channel to A or B
(Whichever is not in use)
4. Insert battery into compartment.
Note polarity indicators
5. Replace battery door
6. Charge battery overnight before
initial use
IMPORTANT!
To ensure top performance
and avoid equipment damage, FrontRow
recommends replacing rechargeable batteries
at the beginning of each school year.
Charge Battery Nightly
Indicator light will blink red when battery is low
NOTe:
If you forget to charge your micro-
phone at night, you may use a standard AA
(LR6) alkaline battery instead. Remember to
remove the alkaline battery and replace it with
a FrontRow "silver-sleeve", auto-sensing bat-
tery before charging the unit.
IMPORTANT!
In order to prevent damage
to your microphone, the SmartCharge
feature is intended to prevent charging of
any battery other than the "silver sleeve"
auto-sensing battery supplied by FrontRow.
Do not attempt to charge alkaline batteries
separately. To ensure proper charging,
always be sure that only FrontRow "silver
sleeve" auto-sensing batteries are installed.
7
950H Pass-Around Microphone
Setting gain, channel, installing battery, and charging
1
4
2
3
