7
9
8
6
5
14
11
10
12
13
15
11
11
10
© COPYRIGHT 2017 FRONT RUNNER VEHICLE OUTFITTERS
TENT031_REV_A01_MV
4.2
4.1
Fit and secure the ladder hinges to the
base of the tent with the four M6x40mm
hex bolts (Item 15). Insert the bolts from
the inside of the tent and secure with
four M6 Nyloc nuts (Item 10) and
washers (Items 11).
Secure the ladder to the hinges (Item 14)
as shown, note the position of the plastic
washer (Item 12).
FITMENT
4
10mm
10mm
4.4
If mounting to a Front Runner Rack
refer to the fitting instructions supplied
with your Front Runner Tent Mount Kit.
Fit the plastic end caps to the mounting
channel ends (Item 17).
Once your tent is securely mounted
move on to the next step.
*TBMK008
*TBMK004
*TBMK001
4.3
If mounting to an old-fashioned steel
rack with oval/rectangular rails or to
load bars that are no wider than 90mm
and no higher than 38mm. Use the load
bar plates supplied (Item 7).
Insert the M8 hex bolts (Item 5) through
the channel plates (Item 6) and then the
channel plate with the hex bolt into the
mounting channel.
Secure as shown.
13mm
