NEVER EXTEND THE LADDER BEYOND THE FACTORY HOLES AND LOCKING POSITIONS.
DO NOT DRILL NEW HOLES PAST THE EXISTING HOLES.
THE LADDER IS NOT SAFE WHEN EXTENDED PAST THE FACTORY HOLES.
IF A LONGER LADDER IS NEEDED FOR EXTREMELY HIGH VEHICLES, PLEASE ORDER A LADDER EXTENSION. (TENT022)
WARNING! READ ME FIRST!
© COPYRIGHT 2017 FRONT RUNNER VEHICLE OUTFITTERS
6
TENT031_REV_A01_MV
4.5
4.6
When extended and resting on solid
ground, the ladder should have a slight
angle outwards.
The ladder has been pre-drilled for the
popular vehicle heights, you may need to
drill one additional hole either side of
the ladder if you need it to be shorter.
Disengage the pins to position the ladder
to the desired angle.
Mark the position of the pins and using a
7mm bit, drill the 2 additional holes for
the pins to lock in to.
Open the tent using the ladder as a lever.
Checking that the ladder reaches the
ground. The ladder has pre-drilled holes
that secure it in place.
FITMENT
4
7mm
4.7
Fit the tent cover by sliding the beaded
edge into the aluminum channel of the
tent base as shown.
