DOOR HINGE
DOOR HINGE
LAMS002_REV_A02
© 2021 FRONT RUNNER VEHICLE OUTFITTERS
4
FIT AND SECURE
2
2.7
2.8
2.9
Working on the right rear door, open the door
and have a friend position the Ladder so that
the mounting holes align with the existing
holes in the top and bottom door hinge outer
castings as shown in 2.8.
Loosely secure the Ladder to the hinge
outer casting at the top of the door using
two M10x30 Hex Head Bolts, four M10 Flat
Washers, one Washer Plate and two M10
Nyloc Nuts (Items 4, 6, 5 & 9).
Repeat the above step for the lower door
Hinge mount.
Align the Ladder before fully tightening all
the fasteners.
Mark the left-hand side top & bottom holes
on the door as shown.
Remove the Ladder and all fasteners.
5
6
4
9
6
DOOR HINGE
17mm
17mm
